ORIGINAL SIZES:
A =
9 inches
B =
36 inches
C =
0.75 inch
Length =
custom
GAUGES AVAILABILITY:
29Ga, 26Ga
* see color chart for details
PRODUCT DETAIL:

Our panels are finished with a high-performance silicone-modified polyester paint system on an AZ50 substrate. This cutting edge resin technology offers unbeatable durability, superior color retention and resistance to dirt accumulation, ensuring low maintenance, lasting beauty and outstanding value. Paint System: Baked-on Silicone Modified Polyester Gauging System: ALL STEEL inc. follows the national A.I.S.I. (American Iron and Steel Institute) specifications manual for tolerances in galvanized sheet metal. All gauges conform to ASTM A446 Grade E (80,000 min. yield) unless otherwise designated at time of order.

ORIGINAL SIZES:
A =
0.78125 inch
B =
0.75 inch
C =
12, 16 or 24 inches
D =
0.875 inch
Length =
custom
GAUGES AVAILABILITY:
26Ga, 24Ga
* see color chart for details
PRODUCT DETAIL:

Max panel width 24 in. Rib height nominal 1 in. Panels continuous over two or more spans. A bead of sealant may be used at panel end laps.
26ga Paint System: Cool XT-40 Baked-on Silicone Modified Polyester Gauging System: ALL STEEL inc. follows the national A.I.S.I. specifications manual for tolerances in galvanized sheet metal.
24ga Paint System: Cool Kynar 500 premium finishes or Flurobond high definition coating.

ORIGINAL SIZES:
A =
2.0 inches
B =
0.6875 inch
C =
0.4375 inch
D =
0.875 inch
E =
0.5 inch
F =
12, 24 inches
Length =
custom
GAUGES AVAILABILITY:
24Ga, 22Ga
* see color chart for details
PRODUCT DETAIL:

coming soon...

ORIGINAL SIZES:
A =
1.1875 inches
B =
0.5 inch
C =
12, 16 or 24 inches
D =
1.75 inches
Length =
custom
GAUGES AVAILABILITY:
24Ga, 22Ga
* see color chart for details
PRODUCT DETAIL:

The Thin Seam panels can be custom tapered to a minimum width of 1?" and a maximum width of 18". The maximum length of tapered panels is 40'. The maximum purlin spacing for Thin Seam panels is 4'on-center. The minimum required roof slope is 1:12. Minimum radius for field curving is 200 ft. Maximum panel length is 65'. Minimum panel length is 4'.

ORIGINAL SIZES:
A =
18.25 inches
B =
2.1875 inches
C =
2.75 inches
D =
0.125 inch
Length =
custom
GAUGES AVAILABILITY:
29Ga, 26Ga
* see color chart for details
PRODUCT DETAIL:

coming soon...

ORIGINAL SIZES:
A =
9 inches
B =
36 inches
C =
0.75 inch
Length =
120 inches
GAUGES AVAILABILITY:
original
* see color chart for details
PRODUCT DETAIL:

coming soon...